How to use tire cross wrench to change tire

The general ratchet wrench tool manufacturers will configure the three numbers, and some will be more flexible. The fourth head is designed as a square drive head with a diameter of 12.5mm. This drive head can be used with a Dafei sleeve. This cross tire wrench is more flexible to use. Use the cross tire wrench to replace the unloaded tire with the spare tire, and then use your hands to tighten the four screws. The unloaded tire is replaced with the spare tire, the spare tire is installed and the angle is adjusted, the bolt holes are aligned, and the upper bolt is installed first.

Hold the tire with your hands or feet, then install the remaining bolts, and use the sleeve of the cross tire wrench to apply force to fix the tire as much as possible. Cross tire wrench is a special tool for tightening or loosening screws. With standard type, different diameter type, positive and negative wire mouth series, 52 types, cross tire wrench can meet the same diameter, different diameter in the horizontal, diagonal, vertical and other positions in the building structure and can adjust the length and direction.

The need to connect steel bars requires the use of socket wrenches when many car owners and friends remove car tires or spark plugs. When using a socket wrench, you need to choose a sleeve that completely fits the nut or bolt. If you use a sleeve that is larger than the nut or bolt, the sleeve can easily replace the nut or bolt during rotation. The head is rounded. When removing the relatively tight wheel bolts, if the sleeve is fitted with a suitable extension rod, the rotation torque of the cross tire wrench can be increased, and the wheel bolts will be loosened relatively easily.

When using a cross tire wrench, you need to adjust the size of the cross tire wrench according to the parts to be tightened, and there must be no gaps. Avoid slipping or damaging parts. During use, the opening line of the cross tire wrench needs to be parallel to the side of the nut. Do not place the cross tire wrench in the six corners and start to twist, which will damage the parts.