Combination Socket sets wrenches are also called dual-u […]
Combination Socket sets wrenches are also called dual-use wrenches. They are composed of a torx wrench and open-end wrench. One end is an open end and the other end is a torx end. This combination wrench is very convenient to use. In the tightening process, you can use the open end to screw the bolt to the end, and then use the toe end to complete the final tightening, and when loosening, use the toe end first to better protect the corners of the bolt or nut. Do not use the open end for the final tightening operation, if you must use an open end wrench for the final tightening. Open-end wrenches can only pull the bolt or nut in a limited space. After the bolt or nut is pulled to the limit position, take out the wrench and repeat the original process. The direction of pulling the wrench should be in the direction of the attached jaws.
When using an open end wrench for final tightening, the force applied to the wrench cannot be too large, otherwise it will cause thread slippage. The hand should be completely clamped on the bolt to increase the contact area. Only use wrenches with the same size as the bolts or nuts. If the size of the wrench is too large, the bolt or nut will be damaged. Wrong use of the wrench can damage the wrench or bolts and nuts. Tight operation should be completely in accordance with the torque requirements of the bolt or nut, and it should not be too large, otherwise it will cause damage to the corners of the bolt or nut. A manual screw tightening tool, single-end and double-end multi-specification movable handle ratchet wrench fixed hole.
It is connected by the main plum sleeve and the slave plum sleeve of different specifications and sizes through the articulation of the female key and the male key. Since a plum blossom sleeve has two sizes of plum blossom-shaped through holes, it can be used for the tightening of two specifications of screws, thereby expanding the scope of use and saving raw materials and labor costs. The movable trigger can easily adjust the use angle of the wrench. This wrench is used for the tightening operation of screws, and has the characteristics of strong applicability, convenient use and low cost. Ratchet wrenches are very common in our lives, mainly used to repair mechanical equipment with screws. It has a wide range of applications and is mainly used for the maintenance and installation of automobiles and machinery.
The ratchet wrench manufacturer introduces you to the skills that the ratchet wrench pays attention to in use; the ratchet wrench is a manual screw tightening tool and one of the most commonly used auto protection tools for auto repair masters. It uses a reciprocating swing type manual turning nut to loosen. It can be tightened, convenient and fast, saving time and effort. The ratchet wrench can meet the torque of the vertical bolt of the railway and is an ideal special tool for tightening the sleeper nut. The ratchet wrench is a manual screw tightening tool and one of the most commonly used auto protection tools by auto repair masters. It uses a reciprocating swing type manual turning nut, which can be loosened and tightened, convenient and fast, saving time and effort. The ratchet wrench can meet the railway The torque of the vertical bolt is an ideal special tool for tightening the sleeper nut. In fact, ratchet wrenches also have skills.